Akredytowane laboratoria TZÚS Praha, s.p. oferują badania z obszaru wyrobów do izolacji termicznej. Wykaz akredytowanych metod badawczych można znaleźć w poniższej tabeli. W obszarze tym TZÚS Praha, s.p. oferuje także nieakredytowane procedury badawcze. W przypadku zainteresowania naszymi usługami, prosimy o kontakt z oddziałem zgodnie z wybranym regionem lub o skorzystanie z formularza zapytania na dole strony. Uzupełnieniem dla usług laboratoryjnych jest oferta naszej jednostki certyfikującej wyroby.
Oddziały regionalne działające w danym obszarze:
(kliknij, aby skontaktować się z oddziałem lub skorzystaj z formularza kontaktowego na dole strony)
Filia Praga
Filia Czeskie Budziejowice
Filia Předměřice nad Łabą
Filia Brno
Filia Ostrava
| ČSN 64 5421 | Testing of cellular materials. Determination of water absorption of cellular plastics |
| ČSN 72 7012-1 | Determination of steady state thermal conductivity of materials. Hot plate methods. General principles |
| ČSN 72 7012-2 | Determination of Steady State Thermal Conductivity of Materials. Hot Plate Methods. Guarded Hot Plate Method |
| ČSN 72 7012-3 | Determination of Steady State Thermal Conductivity of Materials. Hot Plate Methods. Heat Flow Meter Method |
| ČSN 72 7014 | Determination of Steady State Thermal Conductivity of Materials. Evaluating of Tests |
| ČSN 72 7302 | Thermal insulation materials from inorganic fibres. Methods of testing |
| ČSN 72 7306 | Determination of thermal conductivity of building materials and products |
| ČSN 73 2578 | Test for water-tightness of surface finish of building structures |
| ČSN 73 2579 | Test for frost resistance of surface finish of building structures |
| ČSN EN 12085 | Thermal insulating products for building applications - Determination of linear dimensions of test specimens |
| ČSN EN 12086 | Thermal insulating products for building applications - Determination of water vapour transmission properties |
| ČSN EN 12087 | Thermal insulating products for building applications - Determination of long term water absorption by immersion |
| ČSN EN 12087+A1 | Thermal insulating products for building applications - Determination of long term water absorption by immersion |
| ČSN EN 12088 | Thermal insulating products for building applications - Determination of long term water absorption by diffusion |
| ČSN EN 12089 | Thermal insulating products for building applications - Determination of bending behaviour |
| ČSN EN 12090 | Thermal insulating products for building applications - Determination of shear behaviour |
| ČSN EN 12430 | Thermal insulating products for building applications - Determination of behaviour under point load |
| ČSN EN 13829 | Thermal performance of building - Determination of air permeability of buildings - Fan pressurization method (ISO 9972:1996, modified) |
| ČSN EN 15632-4 , art. 6.2 | District heating pipes - Pre-insulated flexible pipe systems - Part 4: Bonded system with metal service pipes; requirements and test methods |
| ČSN EN 1602 | Thermal insulating products for building applications - Determination of the apparent density |
| ČSN EN 1603 | Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity) |
| ČSN EN 1603 | Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity) |
| ČSN EN 1604 | Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions |
| ČSN EN 1605 | Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions |
| ČSN EN 1606 | Thermal insulating products for building applications - Determination of compressive creep |
| ČSN EN 1607 | Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces |
| ČSN EN 1608 | Thermal insulating products for building applications - Determination of tensile strength parallel to faces |
| ČSN EN 1609 | Thermal insulating products for building applications - Determination of short term water absorption by partial immersion |
| ČSN EN 1946-2 | Thermal performance of building products and components - Specific criteria for the assessment of laboratory measuring heat transfer properties - Part 2: Measurements by guarded hot plate method |
| ČSN EN 253, art. 5.2.2 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene |
| ČSN EN 822 | Thermal insulating products for building applications - Determination of length and width |
| ČSN EN 823 | Thermal insulating products for building applications - Determination of thickness |
| ČSN EN 824 | Thermal insulating products for building applications - Determination of squareness |
| ČSN EN 825 | Thermal insulating products for building applications - Determination of flatness |
| ČSN EN 826 | Thermal insulating products for building applications - Determination of compression behaviour |
| ČSN EN ISO 12570 | Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature |
| ČSN EN 12430 | Thermal insulating products for building applications - Determination of behaviour under point load |
| ČSN EN 12431 | Thermal insulating products for building applications - Determination of thickness for floating floor insulating products |
| ČSN EN 12664 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
| ČSN EN 12667 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
| ČSN EN 12939 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance |
| ČSN EN 13162, art. 5.3 | Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification |
| ČSN EN 13163, art. 5.3 | Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) productsc - Specification |
| ČSN EN 13164, art. 5.3 | Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification |
| ČSN EN 13165, art. 5.3 | Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification |
| ČSN EN 13166, art. 5.3 | Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification |
| ČSN EN 13167, art. 5.3 | Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification |
| ČSN EN 13168, art. 5.3 | Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification |
| ČSN EN 13169, art. 5.3 | Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification |
| ČSN EN 13170, art. 5.3 | Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification |
| ČSN EN 13171, art. 5.3 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification |
| ČSN EN 13467 | Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation |
| ČSN EN 13470 | Thermal insulation products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation |
| ČSN EN 13496 | Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes |
| ČSN EN 13950 | Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods |
| ČSN EN 13950 | Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods |
| ČSN EN 13950 | Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods |
| ČSN EN 14303, art. 5.3 | Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification |
| ČSN EN 1934 | Thermal performance of building - Determination of thermal resistance by hot box method using heat flow meter - Masonry |
| ČSN EN ISO 1923 | Cellular plastics and rubbers - Determination of linear dimensions |
| ČSN EN ISO 845 | Cellular plastics and rubbers - Determination of apparent density |
| ČSN EN ISO 8990 | Thermal insulation - Determination of steady state thermal transmission properties - Calibrated and guarded hot box |
| ČSN EN ISO 8990 | Thermal insulation - Determination of steady state thermal transmission properties - Calibrated and guarded hot box |
| ETAG 004 | External Thermal Insulation Composite Systems (ETICS)" with rendering intended for use as external thermal insulation to the walls of buildings |
| ETAG 004, č. 5.1.4.1 | ETICS - Bond strength |
| ETAG 004, art. 5.1.3.1 | ETICS - Water absorption (capillarity test) |
| ETAG 004, art. 5.1.3.2.1 | ETICS - Hygrothermal behaviour |
| ETAG 004, art. 5.1.3.2.1 | ETICS - Hygrothermal behaviour |
| ETAG 004, art. 5.1.3.2.2 | ETICS - Freeze-thaw behaviour |
| ETAG 004, art. 5.1.3.2.2 | ETICS - |
| ETAG 004, art. 5.1.3.3.1 | ETICS - Resistance to hard body impact |
| ETAG 004, art. 5.1.3.3.2 | ETICS - Resistance to perforation (Perfotest) |
| ETAG 004, art. 5.1.3.4 | ETICS - Water vapour permeability (resistance to wa ter vapour diffusion) |
| ETAG 004, art. 5.1.4.1 | ETICS - Bond strength |
| ETAG 004, art. 5.1.4.1.1 | ETICS - Bond strength between base coat and insulation product |
| ETAG 004, art. 5.1.4.1.2 | ETICS - Bond strength test between adhesive and substrate |
| ETAG 004, art. 5.1.4.1.3 | ETICS -Bond strength test between adhesive (mortar or paste) and insulation product |
| ETAG 004, art. 5.1.4.3.1 | ETICS -Pull-through tests of fixings |
| ETAG 004, art. 5.1.4.3.2 | ETICS -Static foam block test |
| ETAG 004, art. 5.1.7.1 | ETICS -Bond strength after ageing |
| ETAG 004, art. 5.1.7.1.2 | ETICS -Bond strength after ageing -Finishing coat not tested on the rig |
| ETAG 004, art. 5.2.4.1.2 | ETICS -Tensile test perpendicular to the faces-In wet conditions |
| ETAG 004, art. 5.5.4.1 | ETICS - Render Strip Tensile Test |
| ETAG 004, art. 5.6.7.1 | ETICS -Glass fibre mesh - Tensile strength and elongation* of the reinforcing fabric |
| ETAG 004, art. C.1.1.1 | ETICS - The identification of the ETICS components -Density |
| ETAG 004, art. C.1.1.2 | ETICS - The identification of the ETICS components - Dry extract |
| ETAG 004, art. C.1.1.3 | ETICS - The identification of the ETICS components - Ash content |
| ETAG 004, art. C.1.2.1 | ETICS - The identification of the ETICS components - Water retention capability |
| ETAG 004, art. C.1.2.2 | ETICS - The identification of the ETICS components -Density of fresh mortar |
| ETAG 004, art. C.1.3.1.2 | ETICS - The identification of the ETICS components -Shrinkage test |
| ETAG 004, art. C.1.3.2 | ETICS - The identification of the ETICS components -Products with a thickness up to 5 mm: static modulus of elasticity, tensile strength and elongation at break |
| ETAG 004, art. C.3.1 | ETICS - The identification of the ETICS components -Reinforcement -Mass per unit area |
| ETAG 004, art. C.3.2 | ETICS - The identification of the ETICS components -Reinforcements -Ash content |
| ETAG 004, art. C.3.3 | ETICS - The identification of the ETICS components -Reinforcement - Mesh size and number of filaments |
| ETAG 004, art. C.3.4 | ETICS -The identification of the ETICS components -Reinforcement- Elongation |
| ETAG 004, art. C.6.1 | ETICS - The identification of the ETICS components -Reinforcement -Mass per unit area |
| ETAG 004, annex C.1.1 | ETICS - The identification of the ETICS components - Density |
| ETAG 004, annex C.1.2 | ETICS - The identification of the ETICS components - Dry extract |
| ETAG 004, annex C.1.3 | ETICS - The identification of the ETICS components - Ash content |
| ETAG 004, annex C.3.2 | ETICS - The identification of the ETICS components - Density of fresh mortar |
| ISO 7892 | ETICS - Impact resistance tests |
| ISO 8302 | Determination of steady-state thermal resistance and related properties |
| ÖNORM B 6122, art. 4.4 | ETICS - reinforcement mesh - determination of thickness and density |